 |
 |
Compressed gas/ explosion hazard: Compressed gas cylinders must be handled with care. Damage can cause an explosion. Wear eye protection. |
- Close valve on top of the tank.
- Disconnect regulator assembly from gas cylinder, using a 1 1/8” wrench.
- Carefully store the regulator assembly in a safe location where it will not be damaged.
- Replace protective cap on tank.
- Either move the empty tank to another secure storage location or leave until it can be picked up.
- Ensure the full cylinder is secure.
- Connect regulator assembly to full cylinder, tightening the connection with a 1 1/8” wrench.
- Conduct a quick leak test:
- Open the cylinder via the valve at the top.
- After the system has pressurized, turn off tank valve and note the pressure.
- Wait one minute, and see if the pressure changes. If the pressure has dropped, tighten the connection fitting further.